Oh, I didn’t mention I lost a hydrolic hose on the tractor back in January. How did I know? Duel trails of yellowish stuff in the snow that seemed to be following the tractor. Of course, I never look back to see such things, but I was hauling hay, and noticed on my return trip. It didn’t seem to be TOO bad of a leak, until I actually got out and found it. Given that the tractor lives on hydrolics (like steering, breaking, transmission, and all the attachments) – running out of hydrolic fluid would not be good. Fortunately, like most things farm built – a tractor is designed to be fixed. Removing the broken hose took all of about 5 minutes Cost about $40 to have a new one made at the local auto repair parts store – not too bad. Oh, one reason we shop (and probably spend a bit more) at the local stores instead of the chains is because, unlike the chains, they do things like make tractor hydrolic hoses! So how much hydrolic fluid did I lose? Well, I thought about 2.5 gallons… I could have sworn the dip stick said it was full, but this weekend the tractor felt “funny” and I found out it needed ANOTHER 2.5 gallons. Now being 5 gallons short of anything is not a good thing, however this is a farm tractor, a real farm tractor… hoses break in the field. Its important to be able to get home when in the field. This tractor has a 59 quart hydrolic capacity… (almost 15 gallons) its designed to survive a hose break – at least for awhile. Cost a fortune come service time, but beats walking home.
Spring time is also burn time. Spent one day up here helping a neighbor burn his field. Spent the next trip helping a couple of neighbors burning their fields, and they came by to help me burn a small one I had ready. Spent the NEXT trip burning two of my own fields, and almost losing control of one of those. Fortunately, that is what neighbors are for… a quick call with the message “Donnie! Losing one! Come quick!” and he showed up… We decided the best thing to do was light a backfire and just burn the entire field. It was ready… it needed it… that probably should have been the plan all along.
But this post is somewhat about repairs… so I should mention I burned through the clutch plates on my tiller. These are the sacrificial plates on the ~40HP Power Take Off (PTO) shaft that powers the tiller. Should the tiller pick up a rock and stop spinning, its a REALLY good idea to have something that will slip – because that PTO will not stop. Seriously, for just a moment, its the most dangerous item on the tractor. Have it turned on, and catch a shoelace in it, or wrap a piece of a jacket in it – and you life if about to change forever, and not in a good way, presuming you live through it. Rule #1 is to ALWAYS turn off the PTO before getting off the tractor. Remember, 4 horse could draw and quarter a grown man… the tractor has 40. Anyhow, I found out those clutch slip disk are rediculously expensive – like $40-$70 EACH (and it takes 2 for my model) depending on where I shopped – about half the cost of the entire clutch assembly. Guess nobody repairs things anymore. A few hours on the internet, and I found them for about $10 each – and bought an extra set for next time. Oddly – none of the three local stores I would normally go for stocked them – so I didn’t feel too bad buying them online and not paying extortion pricing.
Spring time is also calving time. So far we are up 6 newborns. Seriously hoping for 3 more between now and August. Last year was bad… only 5. Any cow that hasn’t given birth in 2 consecutive years gets to have a fall appointment with the butcher. Cruel? Nah, its just business. They are here to give me new ones every year. After 2 years, its clear they are not earning their keep. That said, we are really hoping Nichole comes through. She has our herds best genetics and structure wise is everything we could hope for. Alas, she last delivered on 2/17 of 2014…
Both Frank and recently Gabby are being home schooled now. This gives us a bit of flexibility. I was on hold awaiting some late RFI submissions at work, so could take a 5 day weekend. Evia arranged for a friend to stop and care for our cats – so off the farm we went last Thursday, returning home tomorrow evening (Tuesday). We planted 125 sapplings (typically 1 year old trees) from the MDC nursery two weeks ago. This trip we did the remaining 75, plus three carry overs we potted from last year. We took most of Sunday off as a day of rest. Today we working on the playhouse/chicken coop. Most of the siding it up now, shy a bit of patchwork at the top. I have no idea how we are going to roof it – I’m sure there is a clever way to raise 4×8 sheets of 5/8″ decking up 14-16 feet and have it stay on a slanted roof while being screwed in – but I’m coming up clueless. I may have to punt and call in for help. Maybe. Going to think about it for another few weeks before I give up.
Tomorrow morning is an early trip into town. I’ll buy the family breakfast at the local pancake house (no, not a chain!), then head to Home Depot for things they only have (and to return a Rigid shovel whose handle broke because they didn’t bother to use straight grained wood), MFA for spare hydrolic fluid and grease, Orschein’s for some bulk nuts and bolts, and the gas station for some high octane gas I need to clean my drip torches (used for those prairie burns).
Nice posting, Kevin. Thanks for taking the time to update us on the farms progress. It’s truly amazing what you and Evia have done, to date.
Thanks Bob. What I find amazing is how much harder it is to do things now vs. 8ish years ago when we started. I use to put in 12-15 hour work days. Now its about 7 and I’m dragging.